Amines are used as neutralizing agents for condensation water in boiler treatment. This helps to control corrosion.Our Aquasol AE402 alkalinity kit is very easy to use test to gives reliable results in terms of cyclohexamine.

Phosphonates a are a class of chelating agents and scale inhibitors used in household cleaning products personal care products institutional cleaners and industrial cleaning processes and water treatment additives in various applications. They play an important role in boiler cooling and process water treatment. Our AE411 phosphonate water testing kit is available for low range is used by boiler maintenance personnel frequently.

Amines are used as neutralizing agents for condensation water in boiler treatment. This helps to control corrosion.Our Aquasol AE412 alkalinity kit is very easy to use test to gives reliable results in terms of cyclohexamine.

WWhen water passes through or over deposits such as limestone the levels of ca2+ mg2+ and hco3 ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE501 hardness range is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

When water passes through or over deposits such as limestone the levels of ca2+ mg2+ and hco3 ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE511 hardness range is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

When water passes through or over deposits such as limestone the levels of ca2+ mg2+ and hco3 ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE521 hardness range is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

When water passes through or over deposits such as limestone the levels of ca2+ mg2+ and hco3 ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE531 hardness range is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

When water passes through or over deposits such as limestone the levels of ca2+ mg2+ and hco3 ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE541 hardness range is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

Ozone is a strong oxidizing agent and is used as a biocide in the disinfection of water. It is also used in various sterilization processes in the food and beverage and pharmaceutical industries. Ozone is very effective in removing bad odours and flavours because it breaks down into oxygen which improves taste and other qualities of water. The amount of Ozone required in a water system is determined by Ozone demand and contact time of the water. Our AQUASOL AEOZ3 ozone test is available as DPD method and the kit gives very reliable results. The end point is very sharp and easily discernable by the user and even a shop floor worker will be able to get desired results with our test kit.

Ozone is a strong oxidizing agent and is used as a biocide in the disinfection of water. It is also used in various sterilization processes in the food and beverage and pharmaceutical industries. Ozone is very effective in removing bad odours and flavours because it breaks down into oxygen which improves taste and other qualities of water. The amount of Ozone required in a water system is determined by Ozone demand and contact time of the water. Our AQUASOL AEOZ3H ozone test is available as DPD method and the kit gives very reliable results. The end point is very sharp and easily discernable by the user and even a shop floor worker will be able to get desired results with our test kit.

Arsenic in drinking-water is a hazard to human health. The main source of arsenic in drinking-water is arsenic-rich rocks through which the water has filtered. It may also occur because of mining or industrial activity in some areas. AQUASOL AE408 arsenic test kit provides easy-to-use low-cost method for measuring arsenic levels in water.This water test kit is quite novel and one its kind. It is the effort of our in house Research and developement.

Bromine substances are disinfectants and can be used as an alternative for chlorine. In swimming pools, bromine is used against the formation and growth of algae, bacteria and odors in swimming water.Our AQUASOL AE404 bromine test is based on dpd method and results obtained are easily discernable.

Carbon dioxide can react with water to form carbonic acid (h2co3). Carbonic acid will cause corrosion in steam and return lines. Carbon dioxide can originate from condenser air leakage or bicarbonate (hco3) alkalinity in the feed water.Our AQUASOL AE403 test for carbon dioxide is a titrimetric kit packaged with standardized reagents ready to use convenient and accurate.

Chemical Oxygen Demand (COD) is defined as the amount of a specific oxidant that reacts with the sample under controlled conditions. The quantities of oxidant consumed is expressed in terms of its oxygen equivalence.

Because of Dichromate ions specific oxidant properties (CrO72-) unique chemical properties it gets reduced to the chromic ion (Cr3+) in COD test.

COD is a defined test the extent of sample oxidation can be affected by digestion time reagent strength and sample COD concentration.

COD is often used on a measurement of pollutants in waste water and natural water.

To determine COD two methods are useful the open reflux method is suitable for a wide range of waste water and large sample size is preferred. Another is the closed reflux method is suitable for smaller quantities. It requires homogenisation of sample. Accurate measurement of sample values as well as reagent volumes and concentration are critical.

Principle

• Most type of organic matter are oxidised by a boiling mixture of Chromic and Sulphuric acid. A sample is heated in strongly acid solution with known excess of potassium dichromate.


• After digestion the remaining unreduced dichromate is titrated with Ferrous Ammonium Sulphate to determine the amount of dichromate consumed and the oxidized matter is calculated in terms of oxygen equivalent.


• Closed result method is used for AQUASOL AE407 COD test kit. This kit is applicable to COD values between 40 to 400 mg/l. Obtained high values by dilution.

Chlorine dioxide is a broad-spectrum micro biocide effective over a wide ph range. Chlorine dioxide is effectively used in the control of microbiological growths in industrial cooling waters under conditions unfavorable to chlorine. Our AE405 water test is a titrimetric one generally used by cooling tower maintenance personnel to monitor residuals of the oxidising microbiocide.

Chromate is produced in pickling and plating operations anodizing aluminium leather tanning manufacturing of paints dyes and explosives. Chromate is used to inhibit corrosion in open and closed system cooling towers. This AQUASOL AE208 water test kit is generally used by paint and dye manufacturers and very rarely for monitoring cooling systems as with the advent of technology newer safer biocides are being used and chromate has almost left the scene.

Copper is a metal that exists in the environment as a mineral in rocks and soil. It is commonly found at low levels in natural water bodies. Consumption of high levels of copper can cause nausea vomiting diarrhoea gastric complaints and headaches. Copper salts are used to control algae. The copper water test kit is based on colour comparison and can do 250 tests.

D.O. is essential for the aquatic plant and animal life. DO is detrimental in boiler systems because it leads to corrosion in boiler systems. DO analysis measures the amount of gaseous oxygen (o2) dissolved in an aqueous solution DO measurement is a tricky business, but our Aquasol AED08 kit makes testing easy and simple.

Fluoride occurs naturally in all types of water. Typically surface waters and sea waters have low concentration of fluoride while groundwater may contain high levels of fluoride as it may be exposed to many inorganic fluoride-containing minerals. Fluoride salts are also frequently encountered in many industrial applications. Fluoride is important in drinking water as excessive fluoride cause mottling. A permissible limit has been laid down for fluoride therefore analysis of fluoride is mandatory in drinking water. Our AE210 fluoride water test is one of its kinds and works on the titrimetric principle. The end point is a clear yellow.

Hydrazine is used as an oxygen scavenger for high pressure boilers in power plants and other industries to reduce corrosion of metal pipes and fittings. Our AE304 hydrazine water test kit is regular used for high pressure boiler monitoring the results are easily discernable and can be used by shop floor personnel.

The corrosiveness of process water due to hydrogen peroxide depends on the amount of dissolved oxygen that is produced. Oxygen corrodes iron-containing metals. Hydrogen peroxide is used as a disinfectant. H2o2 is used to disinfect drinking water. It is also used to combat excessive microbial growth in water systems and cooling towers. AQUASOL hydrogen peroxide test kit helps to estimate the concentration of h2o2 in water.

Iodine is present in natural sea water and this iodine occurs as several different species including iodide, iodate, molecular iodine and hypoiodite. Test kits which are not capable of detecting iodate are not suitable for aquarium use, since in a properly functioning tank most of the iodide will be transferred to iodate and any test kits not able to detect iodate will give a false, low iodine reading. Iodine test kits should be capable of measuring all forms of naturally occurring iodine. Our Aquasol AE406 Iodine is the only one offering this feature, measuring all naturally occurring iodine compounds and giving a reading of total iodine concentration.